Primary Weapons Systems - Custom DNTC Compensator
Over the past 15 years I have used numerous muzzle different flash hiders, muzzle brakes / compensators. A short list of the flash hiders / muzzle braakes that I have used are: A1 and A2 compensator, Sabre Defense long A2, Noveske Krink, Smith Vortex, Smith Ent. muzzle brake, Gem-Tech A2 and Vortex bi-loc, MSTN QC Comp, Surefire 556k flash hider, EGW A2 muzzle brake, Bushmaster Y-Comp and Mini-Y Comp, Bushmaster AK muzzle brake, JP Enterprises “Tank Brake”, JP Enterprises muzzle brake, Levang linear comp, CavArms Cav Comp, Wilson Combat muzzle brake that looks like the Cav Comp, Phantom flash hider, Ops Inc 2 port brake.
Those are just the muzzle devices that I can think of off the top of my head. What I learned over the course of several years using several different types of muzzle devices is that ... (to quote Pat Rogers) “There is no free lunch”.
If you wanted the best flash suppression it generally comes at the cost of extra length (ie. Smith Vortex or Phantom) and would offer very little in the way of reducing muzzle rise or felt recoil.
If you want something that was effective at reducing muzzle rise and assists with quicker follow up shots, generally you have to deal a design that enhanced muzzle flash and muzzle blast (noise) and that borders on being obnoxious and uncomfortable for some shooters.
By design, most muzzle brakes direct the most of the gases and muzzle blast (noise) out the side of the muzzle brake (3 and 9 o’clock).
Approximatley a year ago I purchased a Primary Weapons System FSC556 flash suppressing compensator. Compared to other flash suppressors / compensators / muzzle breaks that I had used over the years it was a good compromise between performance and not being too obnoxious or loud.
Several months ago I approached Todd at Primary Weapons Systems ( http://primaryweapons.com/store/pc/home.asp ) also known as PWS about modifying one of their compensators to be the same length as the USGI A2 flash hider / compensator.
During our phone conversation I had asked if there was a way to modify the DNTC (2.00") to the same overall length as the USGI A2 flash hider (1.75")
http://i278.photobucket.com/albums/k...apons/dntc.jpg
USGI A2 on the left, PWS DNTC on the right. Note how much longer the wrench flat area is on the DNTC as compared to the USGI A2. This was the area I was looking at modifying. ( Pic provided by / used with the permission of military moron @ www.militarymorons.com )
The reason I contacted Todd at PWS is because I like the design of their compensators. In my experiences the PWS comps are a very good balance between:
1) Cost
2) Overall length and size
3) Not being overly obnoxious or loud
4) Perform well
The reason I wanted a PWS compensator that was the same overall length as the USGI A2 flash hider (1.75") was because I have been using a 16” barrel with a mid-length gas system and a standard front sight tower as my competition (run and gun) gun for the last few years and had been running a USGI A2 flash hider / compensator on my competition guns.
The USGI A2 looks familar to most AR shooter and "looks right" on most AR15 barrels with a front sight tower.
http://demigodllc.com/photo/PRM-2007...1_8945_img.jpg
Larger version of above photo.
http://demigod.org/~zak/DigiCam/PRM-...0_5410_img.jpg
http://demigodllc.com/photo/PRM-2008...2_6374_img.jpg
( Pics provided by and used with the permission of Zak Smith www.demigodllc.com )
I really liked DNTC (2.00") and the FSC556 (2.10"), but from a purely aesthetic standpoint both of these compensators look too long on the mid-length barrel with the standard front sight tower.
I liked the Primary Wepons DNTC as it looked very simular to the USGI A2 (with the two rear rings and wrench flats). The DNTC has a nice, clean, familiar (looks like the USGI A2) look to it.
The only thing I didn't like about the Primary Weapons DNTC was the overall lenght. To me, the DNTC looked to long on a 16" mid-length barrel with a front sight tower. Performance is paramount, but we all want gear that performs well and is aesthetically pleasing.
I already knew I liked the performance of the Primary Weapons compensators. So I embarked on a project that was based entirely on aesthetics.
Having a DNTC cut down to the same overall length as a USGI A2 flash hider has been something I have been thinking about doing since late spring / early summer of 2008, I just didn't know of anyone that could do the work.
Recently, I contacted member gotm4 on www.m4carbine.com gotm4 is a armorer / gunsmith for a large gun shop on the east coast as well as a 3 gun shooter. I have admired many of gotm4's projects and custom work over the years. I contacted gotm4 to see if he was willing to take on the project and if he had the ability to do the work.
After gotm4 said he was willing to do the work, I was able to purchase the DNTC through gotm4 and pay him directly for the custom work, which made this project a little more convient than I had anticipated.
http://i278.photobucket.com/albums/k...625_edited.jpg
From left to right (All Primary Weapons Systems compensators): Todd's Tiny One Comp, custom DNTC (work performed by gotm4), FSC556, and FSC556 Quick Comp.
http://i278.photobucket.com/albums/k...627_edited.jpg
Comparison of overall length. Left - Todd's Tiny One Comp, Middle - USGI A2 flash hider, Right - custom A2 length Primary Weapons DNTC
http://i278.photobucket.com/albums/k...631_edited.jpg
Side by side of the USGI A2 flash hider and the custom Primary Weapons DNTC
http://i278.photobucket.com/albums/k...647_edited.jpg
The custom Primary Weapons DNTC on a Bravo Company 16" stainless mid-lenght barrel
http://i278.photobucket.com/albums/k...649_edited.jpg
Close up on the Bravo Company stainless barrel
Yesterday I took the Bravo Company stainless mid-length with the custom Primary Weapons DNTC compensator and a Bravo Company standard mid-lenght with a USGI A2 flash hider to the range to do some side by side comparisons between the custom DNTC and the USGI A2.
I used these 2 carbines as it was the best "apples to apples" comparison I could do. Both guns were made by the same manufacturer, had the same barrel length, same gas system, same buffer weight, same bolt carrier group, same rail system, same stock, etc.
http://i278.photobucket.com/albums/k...s/IMG_1652.jpg
Bravo Company Stainless mid-length with Primary Weapons A2 lenght DNTC
http://i278.photobucket.com/albums/k...h/DPP_0020.jpg
Bravo Company mid-lenght with USGI A2 flash hider
My observations from yesterday's range session with both mid-lengths. When confirming zero with both carbines under the tin roof sun shade (shooting from a shooting bench, using a rifle rest, and pulling the rifle in tight to the shoulder, support hand pushing the stock into the shoulder), I noticed that the DNTC had a noticable (but not huge) advantage over the USGI A2 in reduction in muzzle flip.
I also noticed that the DNTC was little louder than the USGI A2. The only hearing protection I was wearing was the yellow foam ear plugs. It's been my experience that shooting under the tin roof amplifies sound. The only time I noticed that the DNTC was louder was when I was paying attention to the sound. It's hard to articulate, but the noise the DNTC makes is more of a blunt noise, and not a sharp crack that I've experienced with other muzzle breaks and compensators.
After confirming zero's on both guns (and making some minor adjustments) I moved down a couple ranges and started shooting steel from standing, kneeling, sitting, and prone.
The DNTC did an excellent job at reducing muzzle flip and follow up shots were much quicker from all positions.
Out in the open, I didn't notice much difference in noise between the USGI and A2, unless I was paying attention to it. Once I started paying attention to it, I noticed that the DNTC was louder than the A2, but not by a huge margin. That being said each person is a little different as to how sensitive they are to noise, so your milage may vary.
Overall, I am impressed with both the performance and the aesthetics of the Primary Weapons custom DNTC compensator.
http://i278.photobucket.com/albums/k...s/IMG_1656.jpg
http://i278.photobucket.com/albums/k...s/IMG_1659.jpg
http://i278.photobucket.com/albums/k...s/IMG_1661.jpg
