Lets see your reloading bench/room

Here is a pic of my setup....built the bench by modifying plans to some found online here ----> http://www.shotgunsportsmagazine.com...ench_plans.pdf

I have plans for another bench on the opposite wall for takedown/cleaning of my firearms and misc other things. The wall to the left of the bench has shelves for my processed brass sorted by caliber. Behind the door I have two tumblers that I use to clean brass up. I like having them behind the door to reduce sound when reloading and to keep the dust out of the "cave" when sorting.


http://i1069.photobucket.com/albums/...des/photo1.jpg

Here's my new bench, opted for a nicer laminate counter top so I can use if for things other than just reloading. Also, took Jim's advice and used c-clamps to bolt a board to the bench that has the press mounted to it, works perfectly!

I will eventually be putting a plywood shelf on the bottom 2x4s, as well as changing the top cabinet (that's a rickety pos that the previous owner left out there). Loaded up 50rds on it this afternoon with the press like that and it works perfectly!

http://www.ar-15.co/attachment.php?a...1&d=1370618052

http://i1100.photobucket.com/albums/...ps2de526ef.jpg

Small but meets my needs for now. I have dies for my .45, .223 and .308. When I get more space I will add another dillon for just the rifles and another for shotgun.

I don't have a bench or a reloading room, yet, but all my stuff arrived at approximately the same time. it's like Christmas around here!

Attachment 31391
Attachment 31393

Attachment 33655 Here is my reload room. Nothing fancy - a 550 for .45 acp and 38 spcl and an older Lyman T-Mag for all of my rifle stuff. I have a friend at work who buys Costco pretzel barrels - they make great brass storage bins. If any of you are electricians, like my dad and brother, yes I have a strip bar plugged into a strip bar - its a jerry rig but it works.

This is my small corner of reloading goodness.
http://i250.photobucket.com/albums/g...ps057b039e.jpg

Here's mine.
I built that bench in 1996 or 1997, following the plans pretty much exactly. It has been moved 5 times and it still locks up as solid as the day I built it. Here's a link to the plans:
http://www.shotgunsportsmagazine.com/downloads/bench_plans.pdf



Attachment 38975

GDW

Started out as 2- 550's which morphed in to the Quadrabench. These pics were taken after moving to make room for Plan B
Attachment 41439

Attachment 41441

Quadrabench morphed in to this WIP (Work In Progress). Which is in the let's make sure this is how we want it, before drilling holes.
Attachment 41443

Started out as 2- 550's which morphed in to the Quadrabench. These pics were taken after moving to make room for Plan B
Attachment 41439
Attachment 41441

Quadrabench morphed in to this WIP (Work In Progress). Which is in the let's make sure this is how we want it, before drilling holes. I think the 1050 will go on the left.
Attachment 41443

My current setup. I really need to add to this.