Finished off 600 pieces of .38 Special mouse fart loads; setting up for 400 rounds of .357, then jumping into coated lead 9mm.
Printable View
Finished off 600 pieces of .38 Special mouse fart loads; setting up for 400 rounds of .357, then jumping into coated lead 9mm.
Quote:
Originally Posted by earplug
[like]
Got my Dillon back last week; good as new (they replaced probably 80% or so of the press.) I got it all set up last night and ready to go.
Attachment 70074
After moving in 2015, I finally got my twin 1050s set up, after much looking for the parts that were missing. Wife very happy, she was low on .45ACP.
Loaded 200 9MM while my lead pot was heating. Cast and powder coated a bunch of 38SPL DEWC and .358 RNFP
Working up a 200 yard load for my 18" 223 wylde AR. Round 1, went with 62 gr bonded btsp and stepped varget from 22.5 - 24.0 10 rounds each, used tweezers to get within .02 (hopefully).
Loaded up a bunch of 300 Whisper ammo for my Bighorn TL-3 switch barrel.
Using Vhit N-110, pointed Berger 230s and Lapua brass going about 1070 fps. Right now it is holding about 1/2 - 2/3 MOA for five shots at 100. The chrono is showing single digit ES.
Going to play with seating depth to see if I can squeeze any more accuracy out of it.
Really really quiet through my Thunderbeast 338 Ultra.
Loaded up 500 rounds of .308Win. Nosler 140CCs over 46 grains of TAC gets 2800 fps and just about 1 MOA out of the DD5V1 out to 600 yards. Loaded 100 165s for hunting since I had it all set up anyway.
Loaded up 500 rounds of .45ACP. Xtreme 200HPs over Clays.
Primed 200 pcs of 6.5. Loading tomorrow.
Neck turned and loaded yesterday for an event today.
http://powerstrokearmy.com/photopost...m/IMG_9454.JPG