Are you still shooting the Speer 125 tnt for your supers?Quote:
Originally Posted by Hoser
Printable View
Are you still shooting the Speer 125 tnt for your supers?Quote:
Originally Posted by Hoser
I use those for my Supers. They do wellQuote:
Originally Posted by bobbyfairbanks
Yes. Awesome bullet. Kind of my all around 30 caliber plinking bullet. Incredible accurate and will stop a deer or coyote in their tracks.Quote:
Originally Posted by bobbyfairbanks
Not as cool looking as the 125 Sierra or 110 Barnes through.
Almost done with the first 5 gallon bucket of 223 for the size/trim.
Curious as to what others do after trimming using the Dillon RapidTrim. Edges of the brass feel pretty sharp, but there doesn't appear to be any burrs. Do you bother to chamfer/deburr? Will be using 55 gr FMJBT, so I don't think they will be shaved when seating, and these are just plinking rounds - mixed brass.
Quote:
Originally Posted by whitewalrus
Just toss it in a tumbler for 1.5 - 2 hours and the edges will soften up. I slightly overload my tumbler so the brass will rub against each other.
Thanks, that was what I was hoping to hear.Quote:
Originally Posted by Hoser
I fully preped 500 9mm cases there ready to load and Primed 300 cases of 223. Then I loaded 30rds of 69 smk and 30rds of 68gr otm and 35rds of 52gr otm to shoot on Thursday.
Cleaned. You can walk in it now
Post #172
https://www.ar-15.co/threads/177956-Bored-yet/page5
Second project, in planning stage
Currently considering cutting a hole thru the wall. This way i can put the vacuum in the other room, run hose thru wall onto case trimmer.
This is my current problem...Quote:
Originally Posted by bobbyfairbanks
O2