Tore down a batch of 6.5x47 Lapua, turned the necks and put them back together. They now go in the chamber. No prep was needed on my McGowen barrel but the X-Caliber is a bit tighter and needed some clean up.
Printable View
Tore down a batch of 6.5x47 Lapua, turned the necks and put them back together. They now go in the chamber. No prep was needed on my McGowen barrel but the X-Caliber is a bit tighter and needed some clean up.
Loading some 9mm today. Weird. I'll have to cast some .44's or .45-70's afterward to make me forget.
Dropped a box of 500 xtreme 9mm bullets. But, like Rainman there were still four in the box, four in the box.
Also picked up 8 more containers of trailboss, guy had collecting dust on his shelf, for $10 per.
Trailboss for $10 each?Quote:
Originally Posted by Great-Kazoo
Huge score.
With all the 223 and 300 Whisper/Blackout brass I have been processing lately, I figured it was time to do a complete tear down on the 1050s and check for any broken or wearing parts.
Luckily, after 3 hours everything was all better and I was back to the races.
44 Mag, 45ACP, 9mm, 30-06 - a good day
Swaged 400ish pcs of 308 brass, another shooter doesn't reload and asked if i could use it. Considering i have (now) 400 bullets of 150 gr 308, why not. Possibly do them all as subsonic rounds later this week.
Ordered a new propane hose for my heater.
Got my 650 back from Dillon. 1 week from drop off & a go thru, to return. Oh FYI. A batch of the new case feeder has a bad board, they replaced that as well.
Loaded some 300 BO supers this week, going to see how they fly today.