Looks like you need a garage sale not garage shelves.
Printable View
Looks like you need a garage sale not garage shelves.
I'll give you first dibs on the bottled water in the 2 liters. The attic is definitely going to be sorted through this spring.Quote:
Originally Posted by hghclsswhitetrsh
I'm going to change the dimensions of these but use the same concept for food storage in my man room.
Attachment 38757
Nah I want that opened coors light bottle. On a serious note I will be following this thread closely for idears.Quote:
Originally Posted by Irving
I would only want the crates. My source for them, "Dried up". HA!Quote:
Originally Posted by Irving
Myself with the studs behind that sheet rock. I would have mounted the back 2x's with lag bolts to the studs / wall and used the back 2'x as an additional . Eithe rway that's whay makes the DIY forum a nice place to bounce ideas off each other.Quote:
Originally Posted by blacklabel
To clarify, that isn't my picture. I thought about mounting them to the studs but don't want to tear up the walls in the finished office that I'm putting them in.Quote:
Originally Posted by jim
Bought these to secure to the brick wall. They require a masonry bit to drill a pilot hole first.
https://lh3.googleusercontent.com/-i...28HDR%2529.jpg
https://lh6.googleusercontent.com/-r...28HDR%2529.jpg
https://lh4.googleusercontent.com/-z...28HDR%2529.jpg
You can see here that I had to "customize" on the left side. I kept running into something that was ruining the screws on the left side. You can see that I tried 5 different holes. Even though the bit would go all the way in, and I made sure the bit was going deeper than the screws, they kept hitting something. I secured that custom 2x4 by slipping it under the top support and putting two screws on the top, and towing two more in on the side.
https://lh5.googleusercontent.com/-x...28HDR%2529.jpg
https://lh4.googleusercontent.com/-l...28HDR%2529.jpg
Next I shimmed underneath both sides. I could climb on it before shimming, but now that the bottom front is supported, it won't put as much stress on the wall anchors.
https://lh3.googleusercontent.com/-8...28HDR%2529.jpg
https://lh5.googleusercontent.com/-q...28HDR%2529.jpg
Oh yeah, I leveled out the one shelf I had in there crooked. This shelf has over twice the shelf space of the last one and still fits the space nicely. Very much an upgrade!
https://lh3.googleusercontent.com/-c...28HDR%2529.jpg
https://lh5.googleusercontent.com/-h...28HDR%2529.jpg
Looks good Stu. I am already addicted to this section.
Thanks! For guys looking for ideas, check out this video that popped up on my Youtube.