Quote Originally Posted by Great-Kazoo View Post
Replace the stock lights, with 68 - 72 repros. That puts the lights @ 5" OAL. OR forgot stock location, run some LED units in the bumper. You're looking to fab this project as necessary. Why not the lights. As for mounting the camper. You need at least 1/2 - 3/4" of air gap between camer & body. If you don't, you'll rot the camper flooring, and or body. Consider boxing the camper base with 1- 1.5" square tubing. Weld locator tabs on outside of tubing. This gives you a solid mounting camper to body. I might have 20' or so of stock, unless my neighbor scrapped it.
Jim, could you pull a tape from the deck in the back to the top of the roof if you get a chance today?

I only have 39" from the base to the cab over so I'm thinking I'll probably have to fabricate a base for the camper to sit on so it will clear the roof.

The more I look at it I think this camper was designed for a smaller truck. There is virtually no info on post 70's Mitchells so I'm just guessing as I go with a lot of things.

Looks like the majority of the dims will work pretty easily.