savage 112 bvss rebarrel vote

[buckshotbarlow]

so I'm all tied up on what to rebarrel it to. the 300wm is shot up. I'm in process on 2 338s on remy actions...but thinking something along the lines of 6.5wsm. i want to hear what u guys think for a mag bolt face. mainly a paper puncher or poodle slayer.

[Colorado Osprey]

My dream would be a 264 Win Mag. You can even use your old 300 brass to make 264 brass. The 264 will out perform the 6.5WSM for the same barrel length.

There has been a history of not getting the accuracy from the overbored 6.5's like the 264 Win Mag and 6.5WSM. I would personally consider the 6.5-06 as a re-barrel as well as getting better barrel life.
That is a pretty big cartridge for a poodle or paper slayer. If that is the extent of the guns and want high volume use you might consider something that even kinder on barrels like the 260 Remington.

Curious to hear other peoples opinions.

[buckshotbarlow]

i luv to hear wildcat and off cartridge porn....esp the the 264wm...and I even have 20 cases!!!

[cstone]

Swapping the bolt head for a .470 would give you lots of options, from .35 Whelen to .308, or .260 Rem, the last two I'm told are cracking nifty for longer ranges.

[buckshotbarlow]

A comparison of the 264WM to the other 6.5's...
+26gr over a 260, which already holds plenty of capacity for the heaviest in 26cal bullets.
+17gr over a 6.5x55, the edge of practical.
+14gr over a 6.5-284, which is a barrel burner.


I was looking at northland, and he does have the following in stock...I still don't have a 260 caliber gun...damn it, i'll be up all night looking at different cartridges...but good call on swapping bolt heads...didn't think about that....
Crit barrels
26″ – Stainless Match – Small Shank – Varmint – 6.5X284 Norma – 8 Twist – $300.00
Shilen barrels
26″ – Stainless Select Match – Small Shank – Varmint – 6.5X284 Norma – 8 Twist – $339.00

• 26″ – Stainless Select Match – Small Shank – Varmint – 300 Win Mag – 10 Twist – $339.00

http://northlandshooterssupply.com/m...avage-barrels/

[Colorado Osprey]

...but good call on swapping bolt heads...didn't think about that....

Very easy and while your in there you might want to swap to a BT or large tac bolt handle and heavier recoil lug as well during the barrel change. The upgrades have been common practice for me on my Savage builds.

[buckshotbarlow]

Very easy and while your in there you might want to swap to a BT or large tac bolt handle and heavier recoil lug as well during the barrel change. The upgrades have been common practice for me on my Savage builds.

mandatory....I was looking at ptg for a new bolt, bolt face...figure I'll just build a new one...

[smchop]

Build a 7mm SUAM, loved mine and wish I would have kept it. If you build on a LA your seating depth with a long VLD would still be good to go!

sorry meant SAUM, not SUAM.

[buckshotbarlow]

hmm 7mm..o.o I would like that 284 from a price point...

• 28″ – Stainless Select Match – Small Shank – Bull – 284 Win – 8 Twist – $379.00

http://www.accurateshooter.com/cartridge-guides/7mm/

[XC700116]

or a 7 WSM, either way, I wish my 7/300 WSM was built on a long action so I could really take advantage of the case capacity and still be able to mag feed it.

Nice thing about the 7/300 WSM is it uses the shorter shouldered 270/300/325 WSM brass so you have a few more brass options (fed, Win, and Norma) than just the 7WSM Winchester Brass. 7 SAUM kinda runs into that same issue only you still have the option of Norma Brass in addition to Remington.

BTW: if you decide to go 7/300 WSM, I have a reamer and go/nogo gauges you could borrow.