HbarTactical.com and OldTimeLeather.com How to order and about us

[HBARleatherneck]

Leather goods. Holsters, IWB, OWB, belts, cowboy action rigs, slings, etc


Visit my website or browse the products showcased here. If you want to have something made let me know. Everything is made to order.
I will give you a discount code to use, and you can pay on the website. Or I can send you an invoice that reflects the discounted prices.

You can also pay with check, cash or paypal. Payment will need to be made prior to shipping your completed order.

I stand behind everything I make. I want you to be happy. If you have comments about how I can improve the product, let me know. If you receive a product from me and you are not happy, return it to me in the same condition you received it and I will refund your money. (original purchase price only)

Leather Belts. All belts are two layers of leather glued with industrial contact cement, then stitched on my stitcher. They are stiff and will last.

I make most 1 1/2" lined belts close to 1/4" thick.(unless you want thinner) This will hold up the heaviest of guns without a stiffener. (unless you are a large waisted person) Tooling is extra and if you are very large there will be additional cost. I have an assortment of classy buckles for dress or casual. Belts can be made to most any width you require. Typically belts have either 5 holes spaced 1" apart or 7 holes space 3/4" apart. Other configurations can be made by request. I can make your belt 1" or 1 1/4" also. (just about any other size too, prices will vary)

Please understand that leather is a natural product. As such it may show scratches, scars, bug bites and other blemishes. Remember these animals used to roam around eating, fighting, rubbing barbed wire, getting branded, etc. I do my best to buy quality leather. However sometimes you may find slight marks in the leather. Please order knowing this ahead of time.


All belt orders need to be measured this way. I will no longer accept returns on belts IF you measured wrong.
Plese forget your vanity, measure like this or please dont order.
Take your existing belt, lay it flat. Measure from the inside of the buckle at the end where the tongue meets. Then measure to the hole that you comfortably where your belt at. These pictures will illustrate how I will measure to make your belt. The measurements you give me will look like this when you get the new belt. The center hole to end of buckle will be the same as the measurements you give me.
If you have any questions make sure you ask first.



Blue guns I have for molding are...


Beretta 92fs no rail
Browning Hi Power

Canik TP9SFx

Colt 1911 5" no rail
Colt Commander 4.25"
Colt Python
Colt SAA 5.5" (single action army)
Colt SAA 7.5" (single action army)

CZ75b
CZ 75c
CZ 75 P-01 (rail, decocker, compact)
CZ P-07

Glock 17 / 22 / 31
Glock 19 / 23 / 32
Glock 21 / 20
Glock 26 / 27
Glock 30
Glock 30S
Glock 42
Glock 42 with Crimson Trace Laserguard
Glock 43
GlOCK 43 with Crimson Trace Laserguard
Glock 43x
Glock 48

HK USP 9mm
HK USP 45auto
HK VP9

Kahr PM9
Kahr PM9 with Crimson Trace Laserguard

Ruger Vaquero 4.5"
Ruger 22/45 4" bull
Ruger 22/45 lite
Ruger American 9mm
Ruger LCP 380
Ruger LCP MAX 380
Ruger LC9
Ruger LCR
Ruger SR22
Ruger SR9c
Ruger GP100 4"
Ruger SP101 3"

Sig Sauer P225
Sig Sauer P226
Sig Sauer P229 Compact
Sig Sauer P230/232
Sig Sauer P238
Sig Sauer P238 with Crimson Trace Laserguard
Sig Sauer P239
Sig Sauer P250 full size
Sig Sauer P250 compact
Sig Sauer P250 sub compact
Sig Sauer P320 full size
Sig Sauer P320 compact
Sig Sauer P320 sub compact
Sig Sauer P365
Sig Sauer P365 XL
Sig Sauer Mosquito

Smith & Wesson Governor 2.5"
Smith & Wesson 642 / 442 /638
Smith & Wesson Model 36
Smith & Wesson Model 60 3"
Smith & Wesson Model 686 4"
Smith & Wesson K frame 4"
Smith & Wesson Bodyguard 380
Smith & Wesson M&P Shield
Smith & Wesson M&P 9/40
Smith & Wesson M&P Compact 9/40

Springfield Armory Hellcat 9mm
Springfield Armory Operator 1911 45 auto
Springfield Armory Micro Compact 1911 45 auto
Springfield Armory Emp 1911 9mm
Springfield Armory XDs 3.3"
Springfield Armory XD-E 3.3"
Springfield Armory XDsc 9mm
Springfield Armory XD 4" 9mm/40
Springfield Armory XDM 5.25" 9mm
Springfield Armory XDM 4.5" 45auto
Springfield Armory XDM 4.5" 9mm
Springfield Armory XDM 3.8" 9mm

​Stacatto P


Taurus Judge Public Defender 2"
Taurus Millennium PT111 G2

Walther P99 .40sw
Walther PPQ
Walther PPQ M2 4" 9mm

[Great-Kazoo]

FINALLY
Having known Hbar & his family sometime now, you'll get a quality product. However quality takes time, be patient and you'll be happy.


BTW: That vest looks familiar

[argonstrom]

The first thing that comes to mind is, "THIS HOLSTER IS AMAZING!!!"


The construction is a work of art! The leather form is perfect, the stitching is perfect, and the edges are perfect. It fits and carries nicely; it blends and doesn't print.


Further, his attention to the customer's needs are beyond reproach.


This holster is the best I've ever owned, and will see daily use.

[argonstrom]

I loved that holster so much, I ordered an OWB holster from Mr. HBAR.

This thing is so comfortable, prints less and conceals better than any IWB holster I've owned (assuming the shirt is long enough).

[hurley842002]

For a S&W M&P Shield

Ohhh I like that, would be an excellent option for the G43. I've always wanted something in shark skin, have you ever worked with that? I know it's a bit pricey.

[hurley842002]

Add another VERY satisfied customer. The pics just don't do the craftsmanship justice.



Stay tuned to the trading post so I can offload a few items for a matching IWB lol.

[hurley842002]

Maybe I jumped the gun and was too hard on my carrier. It came a bit ago.

WOW this thing is gorgeous!






Sent from my iPhone using Tapatalk

[argonstrom]

Got another one! The tooling is amazing (I wish the camera could pick up the details)! The fit, cant, and craftsmanship is perfect. Thanks again! I'll be ordering more!

[HBARleatherneck]

[HBARleatherneck]

This holster was for someone who wanted an OWB holster but under the belt.