Easy DIY Method For Leveling A Scope Reticle

[sgtlmj]

Most optics companies will have an acceptable error rate for the canting of their reticles, which is why it's always preferable to level the reticle and not the exterior of the scope. I usually start by leveling the rifle and a flat part of the scope like the top of the turret, but then always check against something plumb to make sure the reticle is level. Shoot some box drills and see if the scope tracks.

[Guylee]

Most optics companies will have an acceptable error rate for the canting of their reticles, which is why it's always preferable to level the reticle and not the exterior of the scope. I usually start by leveling the rifle and a flat part of the scope like the top of the turret, but then always check against something plumb to make sure the reticle is level. Shoot some box drills and see if the scope tracks.

What would you say the acceptable error rate is? Just curious.

[sgtlmj]

What would you say the acceptable error rate is? Just curious.

Leupold used to say up to 2 degrees was acceptable. Don't know if that is still the case. I've seen high-end scopes like Khales need to be sent back for excessive cant.