Barbed Wire Fence Install

[th3w01f]

Does anyone know a company that does barbed wire fencing between Denver and the Springs?

We need to cross fence our back pasture and need a straight, 5 wire with barbed fence with stays and 2 10' gates. The path is cleared pasture land. the gates would be at each end of the fence.

The total length is measuring out at 560'.

[crays]

Have you checked the barter/business card board at the Big R? The employees there might have some intel as well, if no one on here has any info.

[th3w01f]

Have you checked the barter/business card board at the Big R? The employees there might have some intel as well, if no one on here has any info.

Good call, I hadn't even thought of that. We do have a Tractor Supply nearby so I'll check there today maybe I'll put up my own sign too. Should be a pretty straight forward job for someone who knows what they're doing.

[00tec]

I am definitely anti barbed wire. Rip it all out....

[BladesNBarrels]

Does anyone know a company that does barbed wire fencing between Denver and the Springs?

Just can't get past the thought.......
That is a long distance to build a fence.

[funkymonkey1111]

Just can't get past the thought.......
That is a long distance to build a fence.

my first thought, too. "that's one long fence...."

[CS1983]

my first thought, too. "that's one long fence...."

Make the Front Range Great Again!

[th3w01f]

LOL, I thought about my wording too but decided to leave it. ;-)

Got a couple of bids over the weekend, looks like it's going to be right about $2K but I can get it done week. Thanks again for the advice of checking the local farm store.

[TRnCO]

It's not really all that hard to do. I have the tools to do it, just finished mine this past spring, if you want to borrow the tools you're welcome to and if you need some pointers on how to do it, I can fill you in on that too. Hardest part is getting the H braces dug and set. Once that's done everything else is just easy labor.

I've also got a bunch of left over used T post I'd sell if you're interested in saving a little money on the project, plus I have one full roll of barbed wire I'd sell too.

[00tec]

It's not really all that hard to do. I have the tools to do it, just finished mine this past spring, if you want to borrow the tools you're welcome to and if you need some pointers on how to do it, I can fill you in on that too. Hardest part is getting the H braces dug and set. Once that's done everything else is just easy labor.

I've also got a bunch of left over used T post I'd sell if you're interested in saving a little money on the project, plus I have one full roll of barbed wire I'd sell too.

I may be interested in the t posts if the OP isnt. I have 1.05 miles to run (but I'm going electric, had a bad experience with barbed wire)