2001 Ford Excursion 4x4 7.3 Transmission

[Erni]

Thanks. I got only 100k on my 05. Lets hope it gets to 260k in one piece.

[Wulf202]

185k on my 99. Thanks for the info

[3beansalad]

Please keep me updated on the health of the rebuild. I've got 178K on my 02 Ex. The 4R100 has been well maintained, but I know that a rebuild will be in my future based on the towing I do. I'd bring it to Denver for a quality job. Was considering sending the tranny to the guys at A1 Transmission in GA when the time came, but would rather spend my $ in state if possible.

[n8tive97]

Please keep me updated on the health of the rebuild. I've got 178K on my 02 Ex. The 4R100 has been well maintained, but I know that a rebuild will be in my future based on the towing I do. I'd bring it to Denver for a quality job. Was considering sending the tranny to the guys at A1 Transmission in GA when the time came, but would rather spend my $ in state if possible.

Will do. Took it to the mountains yesterday, did great. I feel like I need to put a transmission temp gauge on it due to towing.

Sent from my SM-N910V using Tapatalk

[Martinjmpr]

Will do. Took it to the mountains yesterday, did great. I feel like I need to put a transmission temp gauge on it due to towing.

Sent from my SM-N910V using Tapatalk

.
You may be able to use a Scangauge II to show trans fluid temperature. It worked on both of my 4runners and it works on my Suburban.
.
Much easier than installing a gauge - just plug it into the OBD-II port. There are other OBD-II port readers that will show trans temp as well. Some of them will send the info to your smartphone.

[00tec]

.
You may be able to use a Scangauge II to show trans fluid temperature. It worked on both of my 4runners and it works on my Suburban.
.
Much easier than installing a gauge - just plug it into the OBD-II port. There are other OBD-II port readers that will show trans temp as well. Some of them will send the info to your smartphone.

FORSCAN and a cheap wifi OBD2 adapter.
Not the prettiest app, but is the best diag/service scanner for a Ford and a phone or computer without getting into the high dollar mechanic scan tools. (PC version can even run some service procedures)

[3beansalad]

.
You may be able to use a Scangauge II to show trans fluid temperature. It worked on both of my 4runners and it works on my Suburban.
.
Much easier than installing a gauge - just plug it into the OBD-II port. There are other OBD-II port readers that will show trans temp as well. Some of them will send the info to your smartphone.

This should work, I use Torque Pro and a ScanTool 427201 OBDLink LX Bluetooth (on a cheapo tablet) to keep track of tranny temps and a lot of other info.

[Wulf202]

The cheap WiFi odb2 scanners don't work on my f250. Diesels need other units.

After shopping for a month I ended up buying my pillar 4 Guage pod on amazon from glowshift. Best deal and came with all the install fittings. If you want to look at it and the two small mods I had to do just let me know.

[n8tive97]

The cheap WiFi odb2 scanners don't work on my f250. Diesels need other units.

After shopping for a month I ended up buying my pillar 4 Guage pod on amazon from glowshift. Best deal and came with all the install fittings. If you want to look at it and the two small mods I had to do just let me know.

Where are you located? I'd like to check it out.

Sent from my SM-N910V using Tapatalk