SBRs in El Paso County

[rtr]

I just got my form 1 for an MP5 SBR (semi auto) back from Terry Maketa, thought I'd share my experience.

Got my photos and fingerprints taken by Chapter One on Pikes Peak (across from post office) $9 for photos, $16 for fingerprints, they stock the FBI fingerprint form you need.

Took the Form 1 and fingerprints to the sheriff, got it back in about 2 days.

Not sure why the sheriff wanted to see the fingerprints too, but they did, FYI they don't do fingerprints at the sheriff office, CSPD fingerprint tech had never heard of the FBI fingerprint form when I called and asked.

If you have questions call the main # at the sheriff's office and ask for Jane Frohm.

Now for the long wait with the ATF.

[KarlPMann]

Ummm, I hope you didn't mail that little packet off yet. ops: :roll: The cards need a specific ORI on them or ATF WILL REFUSE to use them. And guess what, they wont tell you in most cases. You'll have to call after waiting 6 months then find out. :shock: Better call your examiner ASAP and find out what you'll need to do. Also, the fingerprints MUST be done by a law enforcement agency and be certified by the person taking them. CSPD does do this. There's a fee, but you bring the cards you got from ATF. I know Teller County does fingerprints for a fee also. Karl.

[The1andOnlyKC]

I do finger prints everyday for people that bring all the cards to the office. If you have everything you need and one of us happen to be in the office we will do them. If we are all out on the road then come back later or wait around but it could be a while.

[rtr]

Thanks for the heads up Karl, I'll get some cards from Chapter 1 and take them down to CSPD to get printed.

[colblaster]

What is a specific ORI ?

If I get my fingerprints done by CSPD they should be able to take care of all of this ?

[KarlPMann]

What is a specific ORI ?

If I get my fingerprints done by CSPD they should be able to take care of all of this ?

NO! They wont have a clue what ORI to use. Go read this thread...

http://coloradoshooting.org/v-web/bu...topic.php?t=43

the last ORI was...

DCATF0100
AT&F
FIREARMS & EXPLO DIV
WASH, DC


but it can change. ATF sends you the cards with all the correct info already on them. Karl.

[rtr]

Ok my cards read:

"COCBI0000
COLO B OF I
DENVER, CO"

In the ORI box, is that ok?

Second I don't see a place on the card saying the prints were taken by a certified person or something, so is this an additional attachment that CSPD would give me if I go have them fingerprint me? Is there no possible way that they will accept the prints I have now (done by the person at chapter 1). Sorry for being a pain in the ass, but I appreciate the help.

[RYAN50BMG]

Ok, The ORI must be specific. You should go out to Dragon Arms (683-2200) and ask Terry for the proper cards. Tell her Ryan sent you. Second, You can get the prints done at Chapter One, they do not have to be from a Law Enforcement agency. I have used Chapter One for my last 3-4 transfers with no problems. It sounds like you are SOL with the cards you have because of the ORI info. GO TO DRAGON AND GET THE RIGHT CARDS. You will just be wasting time with anything else. Ryan

[rtr]

Thanks Ryan, anybody headed out to Dragon Man's soon that could grab some cards and drop them off with me or Chapter 1 downtown? Doesn't hurt to ask

[RYAN50BMG]

rtr, PM on the way. Ryan