The post whore thread.

[Great-Kazoo]

Whew! You're gutsy... I'm trying to figure out what our safety plans are going to be while we're there. We get there Thursday morning.

I was planning on taking 70 through Kansas, but now I'd like to stay at least 100 miles away from St Louis, so now we're going through Nebraska.

Take the 680 bypass north of O MA HA. running 80 through O sucks. You going to cheesehead land, ya.

[HoneyBadger]

P.S.

HB, you really should take a rubber mallet or 2x4 and smack those so the rivet sits at the bottom of the keyhole-TIGHT... If they're not tight and you load one corner up enough to twist, they could pop out.

Good catch! They are as tight as they will go. After struggling with the first one, I took my set of calipers and determined that the bottom of the keyholes were .02" smaller than the button that was supposed to fit in them. I called the company and they said that this was normal, as long as I whacked them with a mallet several times and they wouldn't budge. I'm playing it safe and distributing the weight very evenly.

ETA: I did a bunch of pull-ups hanging from various spots along each of the frames and they are all very stiff. I bounced in a few spots to see if I could break anything loose, and it held my bouncing weight just fine.

[HoneyBadger]

Take the 680 bypass north of O MA HA. running 80 through O sucks. You going to cheesehead land, ya.

Yep, did that last time, and I'll do it again. Chicago doesn't have any crazy rules about knives, do they?

[Great-Kazoo]

Yep, did that last time, and I'll do it again. Chicago doesn't have any crazy rules about knives, do they?

There's a way around chi-town, I'll ask my guy there about. You get my pm?

[HoneyBadger]

There's a way around chi-town, I'll ask my guy there about. You get my pm?

Yep, I'll try to call. I don't know what hours I'll be working tomorrow... I have a lot to get done before leaving on the trip.

[bogie]

Just stopping by today good night. Y'all have a good day tomorrow.

[Great-Kazoo]

Night John boy

[brutal]

Might try checking with Conesco, they are southeast metro. I started two production facilities and two warehouses 2004-2007. They had the best prices at the time for new and used. Their used was usually new with some scratches in the paint.


lobbed from my electronic ball and chain

thanks,

I'll give them a call in the morning.

I used to have a guy that did recycled data center raised flooring that I thought might have some good contacts, but I lost his contact info years ago.

[buffalobo]

Hey buffalobo what do you think about the granite counter top stuff that mounts of existing counter tops?

I don't have much experience with it (we sell and fab 2 & 3 cm). Have talked to a couple people who have it and they both like it. But I have no long term (7+ yrs) data on it.

Compare pricing and warranty carefully. Get several detailed bids for each style. Done properly the overlay stone should be gtg but I still have some concerns about the long term durability.

I would, at the end of the day still recommend 3 cm. Good deals can be found for 3 cm that negate the perceived savings.

lobbed from my electronic ball and chain

[buffalobo]

Well I lived. It was like running through the Blair Witch Project set. I actually found out the trail is closed off at night and people aren't supposed to be back there. I was informed by the police officer that ran me down in the middle of the trail.

Keep running around questionable locations and you may get some real world practice that we can try and replicate at next months match, after our moment of silence for you.



lobbed from my electronic ball and chain