The post whore thread.

[Irving]

It's what I thought I remembered from your post about working down a load. I thought you were quizzing us. After I posted I thought maybe your post about how low you could go was for a different bullet weight, but didn't bother correcting since it's only in the PWT. Sorry if I got you excited.

[Great-Kazoo]

How exactly did you arrive at 18.1?

Same way he guessed that fighter was 6' off the deck

Well i usually go to mfg load data and work from there. While also reading the load data info from Speer, Hornady, #49 etc. I'm not near my data sheets so you're going to do your own leg work for now.

Curious you read the data given on the container? Keeping in mind that data is HIGH END of load.

http://www.hodgdonreloading.com/data/rifle

I then visit other sites where know load data is posted, ALWAYS WORKING FROM LOW END, ALWAYS

http://www.ar15.com/forums/t_6_42/27...__223_Rem.html

[OtterbatHellcat]

ALWAYS WORKING FROM LOW END, ALWAYS



Seems life just kinda works that way too.....ironical.

Howdy fellers.

[Great-Kazoo]

ALWAYS WORKING FROM LOW END, ALWAYS



Seems life just kinda works that way too.....ironical.

Howdy fellers.

I don't mind starting at her feet, you ?

[OtterbatHellcat]

No.....

..especially if she's wearing spiked heels and hose/garters and all that stuff.

Instant Boner...lol

[OtterbatHellcat]

I just finished 44 fish sticks.

40 would have been okay though.

[HoneyBadger]

It's what I thought I remembered from your post about working down a load. I thought you were quizzing us. After I posted I thought maybe your post about how low you could go was for a different bullet weight, but didn't bother correcting since it's only in the PWT. Sorry if I got you excited.

Bummer. My study was pretty unscientific and I was hoping somebody else here had some experience.

[Great-Kazoo]

I just finished 44 fish sticks.

40 would have been okay though.

You getting ready to drop a school of guppies off at the pool.

[Great-Kazoo]

Bummer. My study was pretty unscientific and I was hoping somebody else here had some experience.

You gloss over #66190 ?

[HoneyBadger]

Same way he guessed that fighter was 6' off the deck

Well i usually go to mfg load data and work from there. While also reading the load data info from Speer, Hornady, #49 etc. I'm not near my data sheets so you're going to do your own leg work for now.

Curious you read the data given on the container? Keeping in mind that data is HIGH END of load.

http://www.hodgdonreloading.com/data/rifle

I then visit other sites where know load data is posted, ALWAYS WORKING FROM LOW END, ALWAYS

http://www.ar15.com/forums/t_6_42/27...__223_Rem.html

Yeah, I'm WAY below the official "starting point" on any official load data. I'm around 18 gr., but that wasn't consistently locking back my bolt on an empty mag.