The post whore thread.

[ChickNorris]

So I can imagine.

[Great-Kazoo]

So I can imagine.

For the ruger pistols i made one from a magpul 223 baseplate, since i was bored.

[ChickNorris]

For the ruger pistols i made one from a magpul 223 baseplate, since i was bored.

I don't know what that means

[Irving]

I met the lowest threshold for fabrication and am pretty happy about it. Except for the grinding and the welding, my daughter did everything else, turned every bolt, including using the flap disk to grind the paint off. Also, I thought I had black paint sitting around. I guess not. First actual weld on something. I should have practiced a bit first, hope it holds together.


[imghttps://lh3.googleusercontent.com/P_sfdqusXR3HwRidGMiJVc1XMXPh_qPnDZ7tXPxSZ9oJJXoZy8 oE_1sz2znw6F9x6mheO8QxKvHTtnY6PQAkP23fxUeS74vd1QqN IdgRA9qkSC4FQnuqp9aeTkQ4fx01tZ-hiODMz7dFADG_RYmG-rxuMh2VF9CDQUE3kBBPQ9cXv9wl9-zmwH4Xp8l8otEYW69Wj6CLgDNSV9IPzzl0vzoEIM95uUuXgS7N VoWqRNrqsScXSCzFrepH5BRChuBpyxVYE4I0vO-QxchpwUTlcI7KwqGZEI1qytLVCQRBf_xeQXks3mWPZQotsqP7u YfGUxBGuYyk9G0NPdgVRlQbn7MGqYbL7U4MXvsyWo1-JrATD_plJCsVUwOA_za4NQTsgI8TjlI6HWLjW8pF3nJ2i7ZfTQ AyG-zyG6c75_NDv58i0XPLVG4ODEQDABpP2YNrFGUkOmbZI-ROFP5g_MmrXJ04JNSJwJM8Rsnhp0-t2C0azjiwHyKeVd3ag4tLukZQTdug3X0GHXnmfJ-x9vWRiHIjxkr2abyvcXIDOc8NuWrNUoyj_z4OPIQgFYKNxRZFN LYUl0oiEjj2O6CUI9REbxfxs0nPUMsQe2kpZG0NL3xpYyj5Wz9 aLash1OWaOnwwCF3UIRWj_ZrVJxLXlx66RWPeheaPbKmWmfXkU hJOYMQyYolKZuH3sK5KItlN_XlrjRQk3r-h4wdSvXEP0uveWilmpA=w1112-h625-no[/img]



When I do some more stuff to it, I can start a modifying a trail thread and see all the cool stuff everyone else does.

[Great-Kazoo]

I met the lowest threshold for fabrication and am pretty happy about it. Except for the grinding and the welding, my daughter did everything else, turned every bolt, including using the flap disk to grind the paint off. Also, I thought I had black paint sitting around. I guess not. First actual weld on something. I should have practiced a bit first, hope it holds together.


[imghttps://lh3.googleusercontent.com/P_sfdqusXR3HwRidGMiJVc1XMXPh_qPnDZ7tXPxSZ9oJJXoZy8 oE_1sz2znw6F9x6mheO8QxKvHTtnY6PQAkP23fxUeS74vd1QqN IdgRA9qkSC4FQnuqp9aeTkQ4fx01tZ-hiODMz7dFADG_RYmG-rxuMh2VF9CDQUE3kBBPQ9cXv9wl9-zmwH4Xp8l8otEYW69Wj6CLgDNSV9IPzzl0vzoEIM95uUuXgS7N VoWqRNrqsScXSCzFrepH5BRChuBpyxVYE4I0vO-QxchpwUTlcI7KwqGZEI1qytLVCQRBf_xeQXks3mWPZQotsqP7u YfGUxBGuYyk9G0NPdgVRlQbn7MGqYbL7U4MXvsyWo1-JrATD_plJCsVUwOA_za4NQTsgI8TjlI6HWLjW8pF3nJ2i7ZfTQ AyG-zyG6c75_NDv58i0XPLVG4ODEQDABpP2YNrFGUkOmbZI-ROFP5g_MmrXJ04JNSJwJM8Rsnhp0-t2C0azjiwHyKeVd3ag4tLukZQTdug3X0GHXnmfJ-x9vWRiHIjxkr2abyvcXIDOc8NuWrNUoyj_z4OPIQgFYKNxRZFN LYUl0oiEjj2O6CUI9REbxfxs0nPUMsQe2kpZG0NL3xpYyj5Wz9 aLash1OWaOnwwCF3UIRWj_ZrVJxLXlx66RWPeheaPbKmWmfXkU hJOYMQyYolKZuH3sK5KItlN_XlrjRQk3r-h4wdSvXEP0uveWilmpA=w1112-h625-no[/img]



When I do some more stuff to it, I can start a modifying a trail thread and see all the cool stuff everyone else does.

Not bad. You hit them perches with a hammer to see if they stay on? What wire setting and amperage you use? That the 120A welder?

[Great-Kazoo]

I don't know what that means

I couldn't find the HKS speed loader. So i took a magpul AR base plate, cut it out to look something like this.

https://www.amazon.com/MakerShot-Sim...ateway&sr=8-15

Only i left some "ears" on the inside to catch the thumb button on the mag. When i can't find something in my piles of crap. I'll see what's laying around to fab something up that works, sometimes.

[Irving]

Not bad. You hit them perches with a hammer to see if they stay on? What wire setting and amperage you use? That the 120A welder?

Well it's the 210, but I haven't made the proper extension cord to for my 220v outlet yet, so I was using it 110v. The chart on the side stops at 7/50 for slightly thinner metal. A wire feed speed of 50 never works for me though, so I bumped it down to 30.

[Gman]

This was a brick morning & then some. Fun fun.

Think I need one of them little loader gizmo doodads.

My 10/22 is a bullet hose. I bought one of those hand crank loaders and it works pretty well. Better than pushing them in one at a time.

[ChickNorris]

I also need more magazines. Disrupts the flow to have to stop & load after 30 rds.


A LOT MORE

[Gman]

I haven't bought 22 mags in a long while, and some new ones have been released that I'd like to acquire. Are rimfire mags exempted from the capacity limits? I can't find that anywhere in the limits, only tubular magazines attached to the rifle.