Close
  1. #10891
    Grand Master Know It All
    Join Date
    Jun 2014
    Location
    Centennial
    Posts
    2,983

    Default

    Thanks, sorry Dave my younger son has already laid claim to it LOL. Yes the barrel is marked properly on the left side. I'd guess the original customizer shortened a model 24 barrel from both ends to get the markings centered. The friend I got it from had it reblued so everything matches perfectly. It was pretty cloudy out this morning so this was a quick pic indoors with the obvious flash. I'll get a better one tomorrow when we're supposed to have nicer weather.

  2. #10892
    Machine Gunner Big E3's Avatar
    Join Date
    Jan 2010
    Location
    SE Aurora
    Posts
    1,209

    Default

    I was wondering if they ever made factory snub barrels for the 24, or is that barrel even shorter that a standard snub?

    I always wanted a custom Smith but every time I go over to the S&W forum they convince me that customs have no resale value. And I’m one who could never take a perfectly good Smith and slice it up, even if I knew it would be nice when done. Someday I’ll find one laying on a table and buy it just for fun.
    Life's hard when you're stupid

    When the government came to take our guns, they knocked on the door. After our guns were gone, they never bothered knocking again - Holocaust Survivor

  3. #10893
    Machine Gunner Marine24's Avatar
    Join Date
    Mar 2010
    Location
    Florida
    Posts
    1,245

    Default

    A Jovino. Now there is a find. Almost a cultish following of his work.


    Sent from my iPhone using Tapatalk

  4. #10894
    Grand Master Know It All Hummer's Avatar
    Join Date
    May 2013
    Location
    North of Ward in Subaru County
    Posts
    2,611

    Default


  5. #10895
    Grand Master Know It All
    Join Date
    Jun 2014
    Location
    Centennial
    Posts
    2,983

    Default

    Quote Originally Posted by Big E3 View Post
    I was wondering if they ever made factory snub barrels for the 24, or is that barrel even shorter that a standard snub?

    I always wanted a custom Smith but every time I go over to the S&W forum they convince me that customs have no resale value. And I’m one who could never take a perfectly good Smith and slice it up, even if I knew it would be nice when done. Someday I’ll find one laying on a table and buy it just for fun.

    In 1983 Lew Horton Distributing arranged with S&W to bring out a 3" round butt gun, product code 100787. It's reported that 5000 were made (24-3 models which meant the pinned barrel design was no longer used). From 1985-'87 Smith produced another 5000 or so in the stainless 624, product code 103583 for the first 100 that had special laser engraving denoting a special edition, product code 103580 was the product code for the remaining run.

    Both of these are out there, usually from $800 on the very low end (no box, sometimes without the Combat Stocks that were standard) up to $1200-$1400 depending on the accessories and condition. Not really that hard to find if you want to drop that kind of coin.

    Those guns shouldn't be confused with the 24-6 brought out in 2007 which have a 3" barrel, square butt frame and the internal lock (despised by most of us old farts LOL).

    Jovino's did mark some of their guns "Effector" though most are not. Most Jovino guns, like mine, are a tad under 3". Austin Behlert was also doing a similar conversion at the time though every one I've seen has his name on it somewhere.

    The first time I became aware of them was in 1978 when I met a federal official that had one made up from the shop with a gun shipped directly to Jovino's from S&W. There was a gun writer a number of years ago, Leroy Thompson, that I believe was one of the first to write about them. I've found other articles he's written-as late as 8/16 so I guess he's still around-was a real "been there, done that" kind of guy, haven't found any of his article's about them. If I wanted to drop $75 bucks for a S&W historical letter and wait 6 months I could find out if this one shipped there but frankly at this point in time I'm not doing so.

    Marine24, yup, even without being able to prove the provenance I do believe it's one of them as it matches perfectly with every other one I've seen. I was offered a .45acp version last summer but at the time I had other expenses to deal with. Today, well, life is too short to shoot ugly guns LOL.
    Last edited by Doc45; 04-01-2017 at 17:27.

  6. #10896
    Machine Gunner Big E3's Avatar
    Join Date
    Jan 2010
    Location
    SE Aurora
    Posts
    1,209

    Default

    Thanks Doc, good info. I have been collecting K and J frames for some time and have just developed a new interest in N frames. As usual with Smith’s there’s a lot to learn, and I know you are a good source, so I will pick your brain every chance I get. Thanks again.
    Life's hard when you're stupid

    When the government came to take our guns, they knocked on the door. After our guns were gone, they never bothered knocking again - Holocaust Survivor

  7. #10897
    Grand Master Know It All SouthPaw's Avatar
    Join Date
    Mar 2010
    Location
    Greeley
    Posts
    3,104

    Default

    A few additions to add to the collection. From left to right, ThruNite TN12, Atactical A1, and Revtronic LED:



    "But when it's time to fight, you fight like you are the third monkey on the ramp to Noah's Ark; and brother, it's startin' to rain."

  8. #10898
    QUITTER Irving's Avatar
    Join Date
    Nov 2008
    Location
    Denver, CO
    Posts
    46,527
    Blog Entries
    1

    Default


  9. #10899
    BIG PaPa ray1970's Avatar
    Join Date
    Feb 2010
    Location
    Thornton
    Posts
    18,799
    Blog Entries
    1

    Default

    Holy, hell. New windshield?

  10. #10900
    QUITTER Irving's Avatar
    Join Date
    Nov 2008
    Location
    Denver, CO
    Posts
    46,527
    Blog Entries
    1

    Default

    Yeah, after the state patrol hassled me about it, I didn't want to tempt fate any more. I paid too much, but whatever, at least it's done. I'll probably hit a deer on my way to Omaha tomorrow morning. Sigh

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •