Target Costs

[banks74]

Updated Prices (as of 3-7-2014)

3/8" AR 500

Diamond/Square/Circle

CNC Water Jet Cut:

6": $20
8": $40
10: $60
12": $80
14": $100

CNC Plasma Cut:

6": $18
8": $28
10: $40
12": $55
14": $70

1/2 IPSC: $50
2/3 IPSC: $95
Full IPSC: $175

(Prices do not include shipping)

[mrfish83]

Question - Is the hanger/strap included with the target?

These are great targets which are found at several 'local' matches, and thanks for supporting the shooting industry.

[banks74]

Thanks mrfish83!

The composite hanger and the bolts are not included in the price above. I will get them added to the price list though.

[raz-n-co]

Can we pick up or do we have to pay for shipping?

[banks74]

You can pick them up no problem.

[banks74]

Target Prices updated!!

[O2HeN2]

For those of us not knowledgeable about steel, what's the advantage of water over a plasma cut?

Plasma anneals the edges?

O2

On edit: I got some family up in Greeley, looks like pickup is OK from other threads, so I'll probably order some steel and pick it up!

[00tec]

For those of us not knowledgeable about steel, what's the advantage of water over a plasma cut?

Plasma anneals the edges?

O2

On edit: I got some family up in Greeley, looks like pickup is OK from other threads, so I'll probably order some steel and pick it up!

Exactly. Edges get softer than the rest of the material.

[banks74]

Exactly. Edges get softer than the rest of the material.

Yep exactly!

The edge where it is cut looses a percentage of its hardness. In our experience it has been just a few percent. It is a pretty good compromise of cost/performance. We sell a substantial amount more HD plasma than waterjet.

Local Pickup is good to go!

[O2HeN2]

We sell a substantial amount more HD plasma than waterjet.!

[Humor] (and borrowing from an old joke)

Not surprised, "Plasma cutting" sounds far more techier than "water cutting", so of course people want it because it sounds better.

You need to change your marketing to talk about dihydrogen monoxide cutting. And sprinkle your webpage with nonsense like:

"Our on-site laboratory carefully maintains our hydrogen-oxygen cutting mixture in a precise 2:1 ratio with five-nines of accuracy or better. This assures an accurate, non-annealed edge to the steel, which can happen with plasma cutting.

Our cutting fluid is constantly monitored, and if it exceeds our strict five-nines mixture accuracy, it is immediately disposed of in an ecologically-safe manner and replaced with stock prepared and verified by our laboratory."

You're welcome, and let me place my order before you change your website and raise your dihydrogen monoxide cutting prices.

O2