POI change with Thunderbeast 30p1

[TriggerHappy]

Thanks guys for all the responses.

I totally understand POI and that there will be some when adding a can. I guess I was just spoiled with my first purchase by buying a Surefire. I guess that means more dope for me.....oh wait that sounds bad. Thanks!

[ColoWyo]

As long as you re-zero your scope, your dope will be the same.

Now get back to telling pilots what to do.

[TriggerHappy]

I didn't think of it like that.

Wilco. Lufty is Rollin.

[islandermyk]

I didn't think of it like that.

Wilco. Lufty is Rollin.

There's good beer on that one!

[ColoWyo]

I didn't think of it like that.

Wilco. Lufty is Rollin.

I chuckle every time I think about that story.

[TriggerHappy]

I chuckle every time I think about that story.

That one was for you.

[Zak Smith]

Hi,

The cast majority our customers have less than 3 clicks of adjustments (ie, less than about 0.75 to 1 moa) going from unsuppressed to suppressed. In most cases, the poi change is due to deflection of the barrel: a stiffer barrel will have less change. However, in the remaining minority of cases, we've noticed that the rifles have a larger shift. This is usually due to one or more of the following: thin barrel, weird harmonics, additional forces on barrel that affect dynamics (e.g. gas guns), or some other rifle "build" issue. A shoulder that is not cut exactly square or threads that are not concentric to the bore could also cause it.

In the end, if you look through the breech and the suppressor looks centered and you're not getting baffle strikes, and it's repeatable and accurate, I would recommend to just shoot it.

hope this helps
Zak

[asmo]

Here is a picture of my shot placement difference between suppressed and unsuppressed using a TBAC 30BA. My point of aim (and impact when unsuppressed) is the bottom left tip of the triangle.

This is a 5 shot group at 100m, removing the suppressor and putting it back on - twice. In other words - very repeatable.

[TriggerHappy]

Ok. Maybe my question was confusing. Where is your un-suppressed group and your suppressed group? Shoot holding center, then can it, shoot holding center. How much MOA difference?

Here is a picture of my shot placement difference between suppressed and unsuppressed using a TBAC 30BA. My point of aim (and impact when unsuppressed) is the bottom left tip of the triangle.

This is a 5 shot group at 100m, removing the suppressor and putting it back on - twice. In other words - very repeatable.

[coyote3]

With the can on it shoots 1/2 moa high at 100yds from the no can zero. Seems to do it every time.