What did you do in the reloading room today?

[Hoser]

Finished pointing up the last of my 2,000 Berger 105 6mm Hybrids.

I am so glad Sierra does this at the factory for most of their Matchkings now.

[DenverGP]

All the 9 and 45 I load goes into the clear plastic 50 round cases, and when all my cases are full, I fill up the trays from commercial ammo.

In each case or tray, I have a little slip of paper with the date, bullet brand/type/weight, powder brand, powder charge weight and OAL.

So my last slips for my 45acp rounds have
10/23
CFE 6.2gr
Xtreme 230gr HP 1.250

I was originally loading my 230gr HP to 1.230, but had a few feed issues so I moved them out to 1.250 and found they ran fine.
Now I can tell when I'm grabbing a case what length it was loaded to (so I can grab the longer ones for idpa or pin shoots, but use the shorter ones for range plinking)

I also have a spreadsheet that I update after each reloading session that contains:

Date, # of rounds, caliber, bullet brand/type/weight, powder brand, powder charge weight, OAL and then a column that is a formula of # of rounds times the charge weight. I also note on the spreadsheet when I start on a new can of powder.

I've always used the same primers, so I don't log that, but if I end up changing primers at some point, i'll add that to the spreadsheet as well.

[Irving]

That's pretty much what my aim is as well.

[Jamnanc]

Got my wife to go to the Pawnee Saturday. I think She had fun. She shoots pretty well once she gets comfortable. I got to try out my 308 loads with the hornady 168 amax, 5 shot group with 43.2 grains of ancient h4895. Shot one 1/4" hole with a horizontal flyer that measures about 3/4 moa overall. My best shooting and, knock on wood, best loads so far.

[crays]

De-primed and tumbled 1200 pcs of 308 tonight.
Seems I need to adjust the ergonomics of my de-prime station. Lower back is a bit sore.

Sent from my VS880 using Tapatalk

[Alpha2]

I cranked out a few boxes of 12ga for the Multiplex next weekend at Pawnee S.C.
One time I couldn't get the ram to go all the way up...finally backed everything out and looked in the shell, there was an empty .22lr case laying in the bottom, I just couldn't seem to press it through the primer hole!

[Irving]

I cranked out a few boxes of 12ga for the Multiplex next weekend at Pawnee S.C.
One time I couldn't get the ram to go all the way up...finally backed everything out and looked in the shell, there was an empty .22lr case laying in the bottom, I just couldn't seem to press it through the primer hole!

Man, time to hit the gym I guess.

[Alpha2]

I know! I actually did work out right after this. Not related. You know how you want to put just a little more force into it, but it doesn't feel right, but you're pretty sure that if you just give it a bit more "oomph", but you don't want to break anything, but.........
I know you've been there!

[Irving]

I know! I actually did work out right after this. Not related. You know how you want to put just a little more force into it, but it doesn't feel right, but you're pretty sure that if you just give it a bit more "oomph", but you don't want to break anything, but.........
I know you've been there!

Yeah, it's usually with primers. I'm pretty surprised I haven't had any go off in my face yet.

[Great-Kazoo]

Just found out i have a 45 conversion for the 650..........Was looking for another item, when i stumbled across a dillon box. Cross referenced the part #'s with my dillon chart, well what do ya know.
Time to make the donuts.