What did you do in the reloading room today?

[Rucker61]

Finished off 600 pieces of .38 Special mouse fart loads; setting up for 400 rounds of .357, then jumping into coated lead 9mm.

[Rucker61]

Tossed some 9MM in a container. Looked at the temperature and left.

[like]

[MED]

Got my Dillon back last week; good as new (they replaced probably 80% or so of the press.) I got it all set up last night and ready to go.

Attachment 70074

[SouthPark]

After moving in 2015, I finally got my twin 1050s set up, after much looking for the parts that were missing. Wife very happy, she was low on .45ACP.

[earplug]

Loaded 200 9MM while my lead pot was heating. Cast and powder coated a bunch of 38SPL DEWC and .358 RNFP

[William]

Working up a 200 yard load for my 18" 223 wylde AR. Round 1, went with 62 gr bonded btsp and stepped varget from 22.5 - 24.0 10 rounds each, used tweezers to get within .02 (hopefully).

[Hoser]

Loaded up a bunch of 300 Whisper ammo for my Bighorn TL-3 switch barrel.

Using Vhit N-110, pointed Berger 230s and Lapua brass going about 1070 fps. Right now it is holding about 1/2 - 2/3 MOA for five shots at 100. The chrono is showing single digit ES.

Going to play with seating depth to see if I can squeeze any more accuracy out of it.

Really really quiet through my Thunderbeast 338 Ultra.

[MarkCO]

Loaded up 500 rounds of .308Win. Nosler 140CCs over 46 grains of TAC gets 2800 fps and just about 1 MOA out of the DD5V1 out to 600 yards. Loaded 100 165s for hunting since I had it all set up anyway.

Loaded up 500 rounds of .45ACP. Xtreme 200HPs over Clays.

[Great-Kazoo]

Primed 200 pcs of 6.5. Loading tomorrow.

[Blowby]

Neck turned and loaded yesterday for an event today.