What did you do in the reloading room today?

[NFATrustGuy]

Swaged about 500 rounds of .223 with my Dillon Super Swager. I had it mounted to the top of my bench with nutserts so I could remove it when it wasn't being used.... Well, it broke loose and so now I've got a messed up bench top and an unmounted swager. Bummer. Gonna have to come up with a more robust solution.

Wet tumbled about 400 pieces of .223.

Loaded up 20 test rounds of Hornady FMJBT 55gr projectiles using CCI small rifle primers and Hodgdon CFE223 powder. There's not much load data out there for this exact setup so I started light at 26.0 grains and 2.190" OAL. I'll run it through my Rock River AR and see what happens. I'm planning on using this load as a general plinking and all-purpose round in my AR and possibly my CZ 527 bolt action with the 1:12 barrel. Once I'm happy with the load, I think I've got enough supplies on hand to put about 3000 rounds on the shelf.

Loaded up 1000 rounds of Sierra MatchKing 69gr HPBT about 10 days ago. Used the CCI small rifle primers and 24.5 grains of Winchester 748 powder. That'll be an AR-only round because the 69gr projectiles are just too heavy for my 1:12 CZ bolt action.

Also did several NFA Trusts today... At least one of them was a board member. Thanks to all of you for making my reloading activities possible!