What did you do in the reloading room today?

[Tim K]

I tried to figure out how to tell Varget from H4350. Its a long story why I needed to know, so I won't bother.

It's hard, but it can be done, I think. A container holding roughly 1200 grains of powder weighs about 1% more filled with 4350 compared to Varget. Not a big difference, but the results are repeatable and detectable.

[Zombie Steve]

You just get bored, or have enough in the hopper that you just couldn't let it go?

[eneranch]

Replaced the 160 rds of 45 ACP I shot at Steel on Friday

[Great-Kazoo]

Crays dropped off 500~ pc of 200 gr hard cast 45acp, yesterday. Might start some loads with them. Or the 200 gr lswc another guy dropped off later in the day.

[Tim K]

You just get bored, or have enough in the hopper that you just couldn't let it go?

I was putting stuff away from the last loading session (.260, H4350) and saw an open can of Varget sitting next to the Chargemaster. I'd just finished 200 rounds that I didn't want to pull apart. After doing all the science, I remembered that my 2yr old son dug some powder out of the cabinet when we were in the shop together. I stupidly didn't pit it away but set it on the bench. Self inflicted wound.

Time for a lock on the powder cabinet.

[Zombie Steve]

Hoser - I loaded up a bunch of 9mm major this morning, but since I don't have a race gun for it I just used .357 magnum brass & boolits and I'll shoot them in my 686. Should come out to about 202 power factor.

[Hoser]

Your still a sissy.

[Zombie Steve]

One day I'll have a FA .454 and be one of the cool kids.

[Great-Kazoo]

Cleaned it.

[Slapps74]

Started Saturday finished up tonight. Prepped over 2000 rounds of 556. Deprime, wet tumble, dry, lube, size, swage, trim remove lube. I might need to see a doctor about my shoulder!