What did you do in the reloading room today?

[bobbyfairbanks]

Yup. Just coated lead.

At 300 Whisper/Blackout velocities they behave just like a JHP, minimal expansion. They do mushroom a touch, but more often that anything they just bend.

Are you still shooting the Speer 125 tnt for your supers?

[whitewalrus]

Are you still shooting the Speer 125 tnt for your supers?

I use those for my Supers. They do well

[Hoser]

Are you still shooting the Speer 125 tnt for your supers?

Yes. Awesome bullet. Kind of my all around 30 caliber plinking bullet. Incredible accurate and will stop a deer or coyote in their tracks.

Not as cool looking as the 125 Sierra or 110 Barnes through.

[whitewalrus]

Almost done with the first 5 gallon bucket of 223 for the size/trim.

Curious as to what others do after trimming using the Dillon RapidTrim. Edges of the brass feel pretty sharp, but there doesn't appear to be any burrs. Do you bother to chamfer/deburr? Will be using 55 gr FMJBT, so I don't think they will be shaved when seating, and these are just plinking rounds - mixed brass.

[Hoser]

Almost done with the first 5 gallon bucket of 223 for the size/trim.

Curious as to what others do after trimming using the Dillon RapidTrim. Edges of the brass feel pretty sharp, but there doesn't appear to be any burrs. Do you bother to chamfer/deburr? Will be using 55 gr FMJBT, so I don't think they will be shaved when seating, and these are just plinking rounds - mixed brass.

Just toss it in a tumbler for 1.5 - 2 hours and the edges will soften up. I slightly overload my tumbler so the brass will rub against each other.

[whitewalrus]

Just toss it in a tumbler for 1.5 - 2 hours and the edges will soften up. I slightly overload my tumbler so the brass will rub against each other.

Thanks, that was what I was hoping to hear.

[beast556]

I fully preped 500 9mm cases there ready to load and Primed 300 cases of 223. Then I loaded 30rds of 69 smk and 30rds of 68gr otm and 35rds of 52gr otm to shoot on Thursday.

[bobbyfairbanks]

Cleaned. You can walk in it now

[Great-Kazoo]

Post #172

https://www.ar-15.co/threads/177956-Bored-yet/page5


Second project, in planning stage
Currently considering cutting a hole thru the wall. This way i can put the vacuum in the other room, run hose thru wall onto case trimmer.

[O2HeN2]

Cleaned. You can walk in it now

This is my current problem...

O2