Fix your coffee machine

[fitz19d]

The DIY is cool, but I'd be somewhat concerned with something as much of a fire hazard as coffee pots. I mean the base construction is so shoddy to begin with...

[Irving]

Mechanically connect it with a crimp.

Thanks.

Talk to one of the electricians on the board and ask them if they can spare a "Buchanan" crimp or two, one small & one large, or a couple each. The crimping tool for them will be useless for this application, due to the inline spice. But you may be able to bend the leads to be side by side, then the tool will work.
The crimps sell in packages of 100 ct. for each size, so that would be too expensive for this repair.

Edit, Newracer posted a picture of the Buchanan crimps.

Would the purchase of a bag be useful for building an inventory of available parts for later projects?

The DIY is cool, but I'd be somewhat concerned with something as much of a fire hazard as coffee pots. I mean the base construction is so shoddy to begin with...

I'm not familiar enough with this stuff to have considered that. Addressing that question now and I'm not concerned since I'm replacing everything with factory identical parts.