Ruger MK III

[Troublco]

I have a Mk II Competition model that I used to shoot bullseye with for years, and one of the best things I did was put a full Volquartsen kit in it. I have not tried this on a Mark III, but on my Mark II I had issues with combustion products building up in the lockwork and causing the trigger pull to get crappy until I cleaned it. I found the info on making a shield to prevent it, and it made a big difference.

http://www.1bad69.com/ruger/blastshield.htm

[Slapps74]

I have a Mk II Competition model that I used to shoot bullseye with for years, and one of the best things I did was put a full Volquartsen kit in it. I have not tried this on a Mark III, but on my Mark II I had issues with combustion products building up in the lockwork and causing the trigger pull to get crappy until I cleaned it. I found the info on making a shield to prevent it, and it made a big difference.

http://www.1bad69.com/ruger/blastshield.htm

i was looking at that. I ordered speed strip kit from Majistic Arms that replaces the hammer with a MK II hammer and bushing that should improve the trigger and help take down. Thought I would try that before the Volquartsen kit.

[hatidua]

put a full Volquartsen kit in it

Best thing I've found for the Ruger pistols.